051
Functions (
)
Metering
If you cannot obtain suitable exposure conditions, you can change
the metering method to take brighter pictures.
[Multi] (
) : Exposure will be calculated
based on an average of
the available light in the
image area. However, the
calculation will be biased
towards the centre of the
image area. This is suitable
for general use.
[Spot] (
) : Only the rectangular area in the centre of the LCD
monitor will be metered for light. This is suitable when
the subject in the centre is exposed correctly, regard-
less of the back lighting.
[Center We ighted] (
)
: Exposure will be calculated based on an average of
the available light in the image area. However, the
calculation will be biased towards the centre of the im-
age area. This is suitable for taking a picture of small
object like a
À
ower or insects.
Ä
If the subject is not the centre of the focus area, do not use the
spot metering as this may result in an exposure error. In this
circumstance, it is better to use exposure compensation.
Dynamic range
The dynamic range can be set to an image
for shooting. When you use the dynamic
range, detailed expressions of dark areas
and bright areas can be achieved. The level
of brightness adjustment of [D-Range Exp.2]
is set higher than [D-Range Exp.1]
Ɣ
If the dynamic range is set too high, a noise may occur.
D-Range Exp.
Back Move
Metering
Back Move
Summary of Contents for HZ25W - Digital Camera - Compact
Page 122: ......
