Samsung HWR450XY Full Manual Download Page 26

Page: 26 / 37

ENG - 22

•

Volume Restriction function

To protect your hearing, the Volume Restriction function restricts the volume to 20 if
you turn on the Soundbar when the volume is set higher than 20.

– The default value for the Volume Restriction function is Off. You must turn it on to

activate it.

– When turned on, the Volume Restriction function stays on even when the power is

turned off.

– To turn Volume Restriction on or off, press and hold the

Down

button on the

remote control for 5 seconds. With Volume Restriction off, “

V FREE

” appears on

the front display. With the function on, “

V LOCK

” appears.

Sound Control

VOL

WOOFER

SOUND

MODE

PAIR

You can select

TREBLE

BASS

, or

AUDIO SYNC

•

To control the volume of the treble or bass sound, select

TREBLE

BASS

in Sound

Settings, and then adjust the volume between -6~+6 by using the

Up/Down

buttons.

•

Press and hold the

(Sound Control)

button for about 5 seconds to adjust the sound

for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the

Left/Right

buttons and each can be adjusted to a setting between

-6 to +6 using the

Up/Down

buttons.

•

If the video on the TV and audio from the Soundbar are not synchronised, select

AUDIO

SYNC

in Sound Settings, and then

set the audio delay between 0~300 milliseconds

using the

Up/Down

buttons. (Not available in “

USB

” mode.)

•

AUDIO SYNC

is only supported for some functions.

VOL

WOOFER

SOUND

MODE

PAIR

WOOFER

SOU

VOL

WOOFE

SOUNDB

SOU

VOL

WOOFE

SOUNDB

SOU

VOL

WOOFE

SOUNDB

SOU

VOL

WOOFE

SOUNDB

Push the

WOOFER

button up or down to adjust the volume of the subwoofer to -12 or

between -6 to +6. To set the subwoofer volume level to 0, press the button.

VOL

WOOFER

SOUND

MODE

PAIR

VOL

SOU

VOL

WOOFE

SOUNDB

SOU

VOL

WOOFE

SOUNDB

SOU

VOL

WOOFE

SOUNDB

SOU

VOL

WOOFE

SOUNDB

Push the

VOL

button up or down to adjust the volume.

•

Mute

Press the

VOL

button to mute the sound. Press it again to unmute the sound.

Summary of Contents for HWR450XY






































Search results

Summary of Contents for HWR450XY

Reviews:

Related manuals for HWR450XY

Brands by name

Popular brands

Samsung HWR450XY, Full Manual

Search results

Summary of Contents for HWR450XY

Reviews:

Related manuals for HWR450XY

Brands by name

Popular brands