background image

ENG - iii

FCC Caution :

 

• Any changes or modifications not expressly 

approved by the party responsible for 
compliance could void the user’s authority to 
operate this equipment.

 

• This product satisfies FCC regulations when 

shielded cables and connectors are used to 
connect the unit to other equipment.  
To prevent electromagnetic interference with 
electric appliances, such as radios and 
televisions, use shielded cables and 
connectors for connections. 

Class B FCC Statement

This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference in a residential 
installation. This equipment generates, uses and 
can radiate radio frequency energy and, if not 
installed and used in accordance with the 
instructions, may cause harmful interference to 
radio communications. However, there is no 
guarantee that interference will not occur in a 
particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning 
the equipment off and on, the user is encouraged 
to try to correct the interference by one of the 
following measures:

 

• Reorienting or relocating the receiving 

antenna.

 

• Increasing the separation between the 

equipment and receiver.

 

• Connecting the equipment to an outlet that is 

on a different circuit than the radio or TV.

 

• Consulting the dealer or an experienced 

radio/TV technician for help.

FCC Radiation Exposure Statement : 

This equipment complies with FCC radiation 
exposure limits set forth for an uncontrolled 
environment. This equipment should be installed 
and operated so there is at least 8 inches (20 cm) 
between the radiator and your body. This device 
and its antenna(s) must not be co-located or 
operated in conjunction with any other antenna or 
transmitter.

CALIFORNIA USA ONLY (Applicable for 
networking models only.) 

This Perchlorate warning applies only to primary 
CR(Manganese Dioxide) Lithium coin cells in the 
product sold or distributed ONLY in California 
USA “Perchloate Material - special handling may 
apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate.” 

 
Dispose unwanted electronics through an 
approved recycler. To find the nearest recycling 
location, go to our website:www.samsung.com/
recycling Or call, 1‐800‐SAMSUNG 

 

 

WARNING: Cancer and Reproductive Harm 

- www.P65Warnings.ca.gov.

Important Safety Instructions

Read these operating instructions carefully 
before using the unit. Follow all the safety 
instructions listed below. Keep these operating 
instructions handy for future reference.

1. 

Read these instructions.

2. 

Keep these Instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings.  
Install in accordance with the manufacturer’s 
instructions.

Summary of Contents for HW-T450







































Reviews: