ENG - 24
Method 2. Connecting using an Optical Cable
Pre-connection Checklist
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
•
When you use an optical cable and the terminals have covers, be sure to remove the covers.
LED
Indicator
White On -> Off
“
Digital Audio In
”
DC 24V
SERVICE
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
Bottom of the Soundbar
Optical Cable
(not supplied)
Top of the Soundbar
1.
With the TV and Soundbar turned off, connect the
DIGITAL AUDIO IN (OPTICAL)
port on the
Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in
the figure.
2.
Turn on the Soundbar and TV.
3.
Press the
(Source)
button on the top panel or remote control, and then select the “
Digital
Audio In
” mode.
4.
The TV sound is output from the Soundbar.
