background image

ENG - iv

10. 

Protect the power cord from being walked 
on or pinched particularly at plugs, 
convenience receptacles, and the point 
where they exit from the apparatus.

11. 

Only use attachments/accessories specified 

by the manufacturer.

12. 

Use only with the cart, stand, 
tripod, bracket, or table 

specified by the manufacturer, 

or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination to 
avoid injury from tip-over.

13. 

Unplug this apparatus during lightning 
storms or when unused for long periods of 
time.

14. 

Refer all servicing to qualified service 

personnel. Servicing is required when the 
apparatus has been damaged in any way, 
such as power-supply cord or plug is 
damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus 
has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

PRECAUTIONS

1. 

Ensure that the AC power supply in your 
house complies with the power 

requirements listed on the identification 

sticker located on the bottom of your 
product. Install your product horizontally, on 
a suitable base (furniture), with enough 
space around it for ventilation (3~4 inches). 
Make sure the ventilation slots are not 

covered. Do not place the unit on amplifiers 

or other equipment which may become hot. 
This unit is designed for continuous use.  
 

To fully turn off the unit, disconnect the AC 
plug from the wall outlet. Unplug the unit if 
you intend to leave it unused for a long 
period of time.

2. 

During thunderstorms, disconnect the AC 
plug from the wall outlet. Voltage peaks due 
to lightning could damage the unit.

3. 

Do not expose the unit to direct sunlight or 
other heat sources. This could lead to 
overheating and cause the unit to 
malfunction.

4. 

Protect the product from moisture (i.e. 

vases), and excess heat (e.g. a fireplace) or 

equipment creating strong magnetic or 

electric fields. Unplug the power cable from 

the AC wall socket if the unit malfunctions. 
Your product is not intended for industrial 
use. It is for personal use only. Condensation 
may occur if your product has been stored in 
cold temperatures. If transporting the unit 
during the winter, wait approximately  
2 hours until the unit has reached room 
temperature before using.

5. 

The battery used with this product contains 
chemicals that are harmful to the 
environment. Do not dispose of the battery 
in the general household trash. Do not 
expose the battery to excess heat, direct 

sunlight, or fire. Do not short circuit, 

disassemble, or overheat the battery.  
Danger of explosion if the battery is replaced 
incorrectly. Replace only with the same or 
equivalent type.

Summary of Contents for HW-R50C










































Reviews: