ENG - 16
What is the difference between BT READY and BT PAIRING?
•
BT READY
: In this mode, you can reconnect any Samsung TV or mobile device that was connected before.
•
BT PAIRING
: In this mode, you can connect a new device to the Soundbar.
(Press the
PAIR
button on the Soundbar remote control or press and hold the
(Mic On/Off)
button on the top of the Soundbar for more
than 5 seconds while the Soundbar is in “
BT
” mode.)
Notes on Bluetooth connection
• Locate a new device within 1 m to connect via Bluetooth communication.
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• The Soundbar automatically turns off after 18 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:
‒ If there is a strong electrical field around the Soundbar.
‒
If several Bluetooth devices are simultaneously paired with the Soundbar.
‒
If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main
unit - e.g., microwaves, wireless LAN devices, etc.
Connecting via Wi-Fi
Pre-connection Checklist
• Wi-Fi connection is available only on Samsung TV.
• Check whether
the wireless router (Wi-Fi)
is turned on and
the TV is connected to the router
.
• The TV and Soundbar must be connected to the same wireless network (Wi-Fi).
• If your wireless router (Wi-Fi) uses a DFS channel, you will not be able to establish a Wi-Fi connection between the TV and Soundbar.
Contact your Internet service provider for details.
• Because the menus may differ depending on the year of manufacture, refer to your TV manual.
•
To connect the TV to the Soundbar via Wi-Fi, connect the Soundbar to the wireless router first. See page
23, for details on how to establish
a Wi-Fi connection.
1.
For more information about Wi-Fi connection to the Soundbar, see page 23, “
Method 2. Connecting via Wi-Fi (Wireless Network)
”.
2.
Change the input source of the TV by using the Audio menu to Soundbar.
•
Samsung TVs released in 2017 or later
Home (
) → Menu → Settings ( ) → All Settings ( ) → Sound → Sound Output → Soundbar Q***C (Wi-Fi)
NOTE
The Wi-Fi Dolby Atmos connection is available in some Samsung TVs and some Soundbar models.
Precaution : The Soundbar will restart automatically if you turn on/turn off Wi-Fi.
Wi-Fi
Port deactivation method
Press the
CH LEVEL
button on the remote control of the Soundbar for 30 seconds to turn
Wi-Fi On / Off.
Bluetooth
Port deactivation method
Press the
TONE CONTROL
button on the remote control of the Soundbar for 30 seconds
to turn Bluetooth On / Off.
