ENG - 15
4. Check if the LINK LED is solid blue (connection complete)
Stops blinking.
Glows blue.
Rear of the
Left and Right
Surround Speakers
The LINK LED indicator stops blinking and glows a solid blue when a connection
is established between the Soundbar and the Surround Speakers.
5. If the SWA-9500 does not connect, take the necessary steps according to the LED Indicator’s status
LED status
Action
LINK (Blue)
On
Successfully connected
(normal operation).
-
Blinking
Recovering the connection.
Check if the power cable attached to the main Soundbar unit is
connected properly or wait about 5 minutes.
Repeat steps 2 through 4.
STANDBY (Red)
On
Standby (with the Soundbar main
unit turned off).
Check if the power cable attached to the main Soundbar unit
is connected properly.
Connection failed.
1.
Press the
ID SET
button on the back of the Surround
Speakers with a pen tip for 5~6 seconds until the LINK LED
indicator blinks (in Blue).
5 Sec
2.
Repeat steps 2 through 4.
Red and blue Blinking
-
Malfunction
See the contact information for the Samsung Service Center in
this manual.
