ENG - 24
If the device fails to connect
•
If you have an existing Soundbar (e.g.,
[AV] Samsung Soundbar Q70T
) on the list of speakers on
the Samsung TV, delete it.
•
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the
(Source)
button on the top panel or on the remote control and switch to any mode but “
BT
”.
•
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
What is the difference between BT READY and BT PAIRING?
•
BT READY
: In this mode, you can reconnect any Samsung TV or mobile device that was
connected before.
•
BT PAIRING
: In this mode, you can connect a new device to the Soundbar.
(Press the
PAIR
button on the Soundbar remote control or press and hold the
(Source)
button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “
BT
” mode.)
Notes on Bluetooth connection
•
Locate a new device within 1 m to connect via Bluetooth communication.
•
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•
The Soundbar automatically turns off after 18 minutes in the Ready state.
•
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
•
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
