ENG - 9
Connecting the SWA-8500S to a Soundbar
(Only HT-MM37 supplied)
Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit
(SWA-8500S) to your Soundbar.
1.
Connect the Wireless Receiver Module to the two Surround Speakers.
– The speaker cables are color coded.
SURROUND-LEFT
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
SURROUND-LEFT
SURROUND-RIGHT
•
When connecting the speaker cables to the Wireless Receiver Module, follow these steps:
1.
Insert the grey plug into the grey jack on the Wireless Receiver.
2.
Insert the blue plug into the blue jack on the Wireless Receiver.
2.
Plug in the Wireless Receiver Module, and then check its standby status.
•
The LINK LED indicator (blue LED) on the Wireless Receiver Module should blink. If the LED
does not blink, press the
ID SET
button on the back of the Wireless Receiver Module with a pen
tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please
refer to step 7 on page 11.
ID SET
L
R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
POWER
ID SET
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
STANDBY
LINK
STANDBY
LINK
Blue blinking
5 Sec
