ENG - 6
Manually connecting the subwoofer if automatic connection fails
Check before performing the manual connection
•
Check whether the power cables for the Soundbar and subwoofer are connected properly.
•
Make sure that the Soundbar is turned on.
1.
Press and hold
ID SET
on the rear of the subwoofer for at least 5 seconds.
The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.
5 Sec
Rear of Subwoofer
2.
Turn off the Soundbar.
3.
Press and hold the
VOL
button on the remote control for at least 5 seconds with the Soundbar
turned off (OFF).
4.
The
ID SET
message appears on the display of the Soundbar for 1.3 seconds, and then disappear.
ID SET
Sur
rou
nd
SOU
ND
MO
DE
Blue
toot
h
POW
ER
VOL
WOOFE
R
SOUNDB
AR
5 Sec
5.
When the blue indicator on the subwoofer blinks, turn on the Soundbar’s power by pressing
(Power)
button on the right side of the main unit or on the remote control.
6.
When the connection is successfully established, the blue indicator on the rear of the subwoofer
stops blinking and glows continuously.
• If the connection process fails, the blue indicator will flash continuously. Go to Step 1 and start again.
Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker
Kit (SWA-8500S) to your Soundbar (Sold separately). For more information, see the
Samsung Wireless Rear Speaker Kit manual.
Summary of Contents for HW-M560
Page 1: ...HW M560 USER MANUAL ...
