background image

ENG - iv

PRECAUTIONS

1. 

Ensure that the AC power supply in your 
house complies with the power 

requirements listed on the identification 

sticker located on the back of your product. 
Install your product horizontally, on a 
suitable base (furniture), with enough space 
around it for ventilation (3~4 inches). Make 
sure the ventilation slots are not covered. Do 

not place the unit on amplifiers or other 

equipment which may become hot. This unit 
is designed for continuous use. To fully turn 
off the unit, disconnect the AC plug from the 
wall outlet. Unplug the unit if you intend to 
leave it unused for a long period of time.

2. 

During thunderstorms, disconnect the AC 
plug from the wall outlet. Voltage peaks due 
to lightning could damage the unit.

3. 

Do not expose the unit to direct sunlight or 
other heat sources. This could lead to 
overheating and cause the unit to 
malfunction.

4. 

Protect the product from moisture (i.e. 

vases), and excess heat (e.g. a fireplace) or 

equipment creating strong magnetic or 

electric fields. Unplug the power cable from 

the AC wall socket if the unit malfunctions. 
Your product is not intended for industrial 
use. It is for personal use only. Condensation 
may occur if your product has been stored in 
cold temperatures. If transporting the unit 
during the winter, wait approximately  
2 hours until the unit has reached room 
temperature before using.

5. 

The battery used with this product contains 
chemicals that are harmful to the 
environment. Do not dispose of the battery 
in the general household trash. Do not 
expose the battery to excess heat, direct 

sunlight, or fire. Do not short circuit, 

disassemble, or overheat the battery.  
Danger of explosion if the battery is replaced 
incorrectly. Replace only with the same or 
equivalent type.

Summary of Contents for HW-M370





















































































Reviews: