18
CONNECTIONS
●
Do not connect the power cord of this product or your TV to a wall outlet until all connections between
components are complete.
●
Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER
CONNECTING TO THE SUBWOOFER AUTOMATICALLY
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)
automatically when the main unit and subwoofer are turned on. When the subwoofer is completely connected, the
blue LED Link Indicator on the subwoofer stops blinking and glows continuously. See the indicator modes below:
blue
Auto-connection is complete.
blue
blinking
Auto-connection is not complete.
blue is
not lit
a.
Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
b.
If the power cord is plugged in correctly, check the main unit. If your main unit is off (in standby
mode), the subwoofer will also be in standby mode and the blue LED won't be lit.
CONNECTING TO THE SUBWOOFER MANUALLY
If the indicator on the rear of the subwoofer does not light in blue, the subwoofer has not automatically connected. If
this occurs, follow the directions below to connect the subwoofer manually.
●
Important: Before you begin, put the battery into the remote. See page 12 for instructions.
1.
Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2.
Press the
ID SET
button on the rear of the subwoofer with a small, pointed object for 5 seconds.
•
The LINK indicator (Blue LED) on the subwoofer blinks quickly.
3.
Press the button on your remote control for 5 seconds while the main unit is turned OFF.
4.
The ID SET message appears on the display of the main unit for a short period of time, and then disappears.
CONNECTIONS
