ENG
21
CONNECTIONS
2.
Turn off the Soundbar.
3.
Press and hold the
VOL
button on the remote control for at least 5 seconds with the Soundbar turned off (off).
EFFE
CT
LEVEL
VOL
WOOFER
SOUNDB
AR
EFFE
CT
LEVEL
VOL
WOOFER
SOUNDB
AR
EFFE
CT
LEVEL
VOL
WOOFER
SOUNDB
AR
EFFE
CT
LEVEL
VOL
WOOFER
SOUNDB
AR
4.
The ID SeT message appears on the display of the Soundbar for a short period of time, and then disappears.
iD Set
right Side of the Soundbar
5.
When the blue indicators on the subwoofer and surround sound speakers blink, turn on the power by pressing
button on the right side of the main unit or on the remote control.
6.
When the connection is successfully established, the blue indicators on the rear of the subwoofer and surround
speakers turn on without blinking.
●
If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.
LeD inDiCatOr LaMP StatUS On SUBWOOfer anD
SUrrOUnD SOUnD SPeaKerS
LeD
Status
Description
resolution
red
on
Standby (with the Soundbar main
unit turned off)
Check the power supply to the
Soundbar main unit
Connection failed
Connect again
(refer to the instructions on manual
connection in the user manual)
Blue
on
Successfully connected
(normal operation)
-
Blinking
Standby (with the Soundbar main
unit turned off)
Check the power supply to the
Soundbar main unit
Connection failed
Connect again
(refer to the instructions on manual
connection in the user manual)
red and blue
Blinking
malfunction
Contact the service centre.
