4. Troubleshooting
4.3. Initialization & Update
4.3.1. Initialization method
•
Initalization method
-
Sound Bar (Remote control use)
1) Prepare the remote control.
2) Turn the unit off.
3) Press the “MUTE” button for 5 seconds in the remote control.
4) OLFD display “ID SET”
5) After the sound bar turns on, the initialization is ends.
-
Sub-woofe
1) You can see the ID-set button the rear side of Sub-woofer.
2) When Sub-woofer is turned on, press the ID-set button for 5 seconds.
3) The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
4) The main unit and the sub-woofer will pair automatically.
4.3.2. How to check the Firmware version
•
Software check method
-
Sound Bar (Remote control use)
1) Prepare the remote control.
2) Turn the unit off.
3) Press the “Sound Effectl” button for 5 seconds in the remote control.
4) OLED display a version like below. (Micom → DSP → HDMI → Tx → Rx → Touch)
4-8
Copyright© 1995-2016 SAMSUNG. All rights reserved.
