background image

16

FUNCTIONS

17

BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all 
without wires!

 

▶ To connect the Soundbar to a Bluetooth device

Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.

Bluetooth device

Connect

1. 

Press the (

 ) button on the main unit’s top 

panel or press the 

Bluetooth

button on the 

remote control to display the 

 icon LED.

 

The

 LED will blink indicating that the 

Bluetooth device is not connected yet. 

2. 

Select the Bluetooth menu on the Bluetooth 
device you want to connect. (Refer to the 
Bluetooth device's user manual.)

3. 

Select the Stereo headset menu on the Bluetooth 
device.

 

You will see a list of scanned devices.

4. 

Select 

"[Samsung] Soundbar J-Series"

 from the 

list.

 

If the Bluetooth device is successfully 
connected to the Soundbar, then the 

 LED 

will stop blinking.

 

If the Bluetooth device has failed to pair with 
the Soundbar, delete the previous "

[Samsung] 

Soundbar J-Series

" found by the Bluetooth 

device and have it search for the Soundbar 
again.

5. 

Play music on the connected device.

 

You can listen to the music playing on the 
connected Bluetooth device over the 
Soundbar. 

 

In BT mode, the Play/Pause/Next/Prev 
functions are not available. However, these 
functions are available in Bluetooth devices 
supporting AVRCP.

 

 

If asked for a PIN code when connecting a 
Bluetooth device, enter <0000>.

 

Only one Bluetooth device can be paired 
at a time.

 

The Bluetooth connection will be terminated 
when you turn the Soundbar off.

 

The Soundbar may not perform Bluetooth 
search or connection correctly under the 
following circumstances:

 

- If there is a strong electrical field around 

the Soundbar.

 - If several Bluetooth devices are 

simultaneously paired with the Soundbar.

 

- If the Bluetooth device is turned off, 

not in place, or malfunctions.

 

- Note that such devices as microwave 

ovens, wireless LAN adaptors, 
fluorescent lights, and gas stoves use 
the same frequency range as the 
Bluetooth device, which can cause 
electric interference.

 

The Soundbar supports SBC data 
(44.1kHz, 48kHz).

 

Connect only to a Bluetooth device that 
supports the A2DP (AV) function.

 

You cannot connect the Soundbar to a 
Bluetooth device that supports only the HF 
(Hands Free) function.

 

Once paired, if the Soundbar is in D.IN, 
AUX, or USB mode, selecting "[

Samsung] 

Soundbar J-Series

" from the list on your 

Bluetooth device will automatically change 
the Soundbar's mode to BT.

02839Z-HW-JM25 ZA-20150602.indd   16

2015/7/22   15:47:15

Summary of Contents for HW-JM25


























Reviews: