12
connections
ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF
THE SUBWOOFER
Attaching the Toroidal ferrite core to the power cord of the
subwoofer helps prevent RF interference from radio signals.
1
. Pull the fixing tab of the Toroidal ferrite core to open it.
2
. Make two loops around the core with the power cable of the
subwoofer.
3.
Attach the Toroidal ferrite core to the Subwoofer power cord as the
figure shows, and then press it until it clicks.
LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core.
Make two loops around the core with the power
cable.
(Start winding 2 to 4 inches [5-10 cm]
away from the core).
Close the lock.
ID SET
