Samsung HW-F Series, How To Reset

Page: 14 / 16

How to reset Soundbar HW-N950
1/2
Initialization method Soundbar (Using the remote control):
1. Set should be plugged in and in Power ON Mode.
2. Press and hold the
“Sound Control” button for more than 10 seconds by using Remote Controller.
3. Front OLED will be Display
4.
If it was successful, “INIT”->”OK” will be displayed for 2 seconds and be turned off.
INIT
OK
Initialization method Soundbar (Without using the remote control):
1. Set should be plugged in and switched ON.
2. Press
and hold the “+” button and “-” button on Sound Bar simultaneously for 5 seconds.
3. Front OLED will be Display
4.
If it was successful, “INIT”->”OK” will be displayed for 2 seconds and be turned off.
• Things being cleared after initialization : WiFi, BT, EQ, and other uer settings.
• Subwoofer and Rear connection will not be cleared by above initialization.
• So the “IDset “ must be conducted after repair on both of Soundbar and wireless Rear/ subwoofer so as to make them auto connection on customers
hand.
• ( If subwoofer/rear speaker did not come to SVC, you need to guide the customer how to pair them)
INIT
OK