Samsung HW-C500 User Manual Download Page 2

2

Safety information

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

This symbol indicates “dangerous voltage” 
inside the product that presents a risk of 
electric shock or personal injury.

This symbol indicates important instructions 
accompanying the product.

WARNING

To reduce the risk of fi re or electric shock, do not expose this appliance to rain or moisture.

To prevent injury, this apparatus must be securely attached to the fl oor/wall in accordance with the  installation instructions. 

CAUTION

Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the 
apparatus. 

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

This product satisfi es FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent 
electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

FCC NOTE (for U.S.A):

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution : FCC regulations state that any unauthorized changes or modifi cations to this equipment may void the user's authority to operate it. 





   

     

Summary of Contents for HW-C500






































































Reviews: