ENG - 11
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
CH LEVEL
By pressing the button, you can adjust the volume of the each speaker.
•
Press the button to select
VIRTUAL CENTER LEVEL
and then adjust the volume
between -6~+6 by using the
Up/Down
buttons.
•
If the Rear Speakers (sold separately) are connected, the setting
REAR LEVEL
is
supported. To adjust the volume of the
REAR LEVEL
between -6 to +6 by using the
Up/
Down
buttons.
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
Sound Control
By pressing the button, you can set the audio function. The desired settings can be
adjusted using the
Up/Down
buttons.
AUDIO SYNC
VOICE ENHANCE ON/OFF
NIGHT MODE ON/OFF
–
AUDIO SYNC
If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control)
button to select
AUDIO SYNC
and then set the audio delay
between 0~300 milliseconds by using the
Up/Down
buttons. (Not available in “
USB
”
or “
BT
” mode.)
–
VOICE ENHANCE ON/OFF
This mode is makes it easier to hear spoken dialog in movies and TV.
–
NIGHT MODE ON/OFF
This mode is optimized for nighttime viewing with the settings adjusted to bring the
volume down but keep the dialog clear.
•
The
VOICE ENHANCE
, and
NIGHT MODE
audio function can be turned
ON/OFF
by
using the
Up/Down
buttons.
•
Press and hold the
(Sound Control)
button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the
Left/Right
buttons and each can be adjusted to a setting between
-6 to +6 using the
Up/Down
buttons. (Make sure the Sound mode is set to “
STANDARD
”.)
SOUND
MODE
WOOFER
TONE
CONTROL
CH LEVEL
Bluetooth
PAIR
Press the
PAIR
button. “
BT PAIRING
” appears in the Soundbar’s display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
Play / Pause
VOL
WOOFER
SOUND
MODE
PAIR
Press the
p
button to pause a music file temporarily.
When you press the button again, the music file plays.
