Samsung HW-A47M, Full Manual

Page: 29 / 43

ENG - 23
VOL WOOFER
SOUND
MODE
PAIR
Bluetooth
PAIR
Press the PAIR button. “ BT PAIRING ” appears in the Soundbar’s display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
Play / Pause
VOL WOOFER
SOUND
MODE
PAIR
Press the
p
button to pause a music file temporarily.
When you press the button again, the music file plays.
VOL WOOFER
SOUND
MODE
PAIR
Up/Down/
Left/Right
Press the indicated areas to select Up/Down/Left/Right.
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in “ USB ” mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a
wireless subwoofer or wireless rear speakers).
Sound Control
VOL WOOFER
SOUND
MODE
PAIR
When pressed, the settings TREBLE , BASS , and AUDIO SYNC are displayed in sequence.
The desired settings can be adjusted using the Up / Down buttons.
• To control the volume of the treble or bass sound, press the (Sound Control) button
to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/
Down buttons.
• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to
“ STANDARD ”.)
• If the video on the TV and audio from the Soundbar are not synchronized, press the
Sound Control button to select AUDIO SYNC and then set the audio delay between
0~300 milliseconds by using the Up/Down buttons. (Not available in “ BT ” and “ USB ”
mode.)
• AUDIO SYNC is only supported for some functions.