ENG - 18
Manually connecting the Subwoofer or Surround Speakers
Before performing the manual connection procedure below:
•
Check whether the power cables for the Soundbar and subwoofer or Surround Speakers are
connected properly.
•
Make sure that the Soundbar is turned off.
1.
Turn off the Soundbar main.
2.
Press and hold
ID SET
on the rear of the subwoofer and surround speakers for at least 5 seconds.
•
The red indicator at the rear of each speaker turns off and the blue indicator blinks.
5 Sec
Rear of Subwoofer
Rear of Subwoofer
Blinking blue
fast
Blinking blue fast
POWER
x 2
Rear of the Left and Right Surround Speakers
5 Sec
3.
Press the
Up
button on the remote control for 5 seconds.
•
The
ID SET
message appears on the display of the Soundbar for a moment, and then it
disappears.
•
The Soundbar will automatically power on when
ID SET
is complete.
SOUN
D
MOD
E
PAIR
5 Sec
ID SET
