English
11
|
02
Getting Started
Rear Panel
HDMI OUT
HDMI IN
1
2
LAN
POWER
AUX IN
FM ANT
OPTICAL
DIGITAL
AUDIO IN
L
R
SUBWOOFER
FRONT
L
FRONT
R
IMPEDANCE : 3
SPEAKERS OUT
SPEAKER OUTPUT
CONNECTORS
COOLING FAN
AUX IN
* FM ANTENNA
HDMI OUT
HDMI IN
LAN TERMINAL
EXTERNAL DIGITAL AUDIO IN (OPTICAL)
POWER CORD
*
Connecting the FM Antenna
1.
Connect the FM antenna supplied to the FM ANT Jack.
2.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
|
NOTES
|
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
Attaching the Toroidal Ferrite Core of the Main Unit
For the Speaker Cable
1.
Open the ferrite core by pulling up the tab.
2.
Make a loop twice in the Speaker Cables.
3.
Attach the ferrite core to the arranged cables and press to close it
until you hear a click.
• Insert the ferrite core as close to the main unit as possible.
For the Power Cord
If you attach a Toroidal ferrite core to the power cord, it will help to prevent
RF interference from radio signals.
1.
Pull the fixing tab of the Toroidal ferrite core to open it.
2.
Make a loop twice in the power cord.
3.
Attach the Toroidal ferrite core to the power cord as the figure shows
and press it until it clicks.
FM ANT
OPTICAL
DIGITAL
AUDIO IN
SUBWOOFER
FRONT
L
FRONT
R
IMPEDANCE : 3
SPEAKERS OUT
POWER
HT-FS9200-XU_0604.indd 11
HT-FS9200-XU_0604.indd 11
2013-06-04 오전 10:32:50
2013-06-04 오전 10:32:50
