|
18
English
Connections
Connecting The Speakers (HT-ES4200 Only)
1.
Match the front speaker cable bundle to the correct speaker by matching
the colour coded plug on each bundle to the coloured sticker on the
bottom of the front speaker.
2.
To attach speaker wire to the front speaker:
a.
Press down the red tab on the back of the front speaker, insert the red
wire, and then release the tab.
b.
Press down the black tab on the back of the front speaker, insert the
black wire, and then release the tab.
3.
Connect the speaker wire plugs to the back of the product by matching
the colours of the front speaker plugs to the colours of the front speaker jacks.
|
CAUTION
|
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install.
However, when you install it, accessories (nails or screws) and installation is not provided by the company.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)
of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
|
NOTE
|
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.
Black
Red
In case of HT-E4200
5V 350mA
LAN
WIRELESS LAN
HDMI
IMPEDANCE : 3
SPEAKERS OUT
FRONT L
SUBWOOFER
FRONT R
IMPEDANCE : 3
SPEAKERS OUT
FRONT
L
SUBWOOFER
FRONT
R
Front Speaker (L)
Front Speaker (R)
Subwoofer
Refer to page 15 for the speakers of HT-ES4200.
HT-E4200_XU_0223.indd 18
HT-E4200_XU_0223.indd 18
2012-02-24 오전 2:14:18
2012-02-24 오전 2:14:18