28
English
Basic Functions
DSP (Digital Signal Processor)/EQ
•
DSP (Digital Signal Processor) : DSP modes have
been designed to simulate different acoustic
environments.
•
EQ : You can select POPS, JAZZ , ROCK, or USER
to optimize the sound for the genre of music you are
playing.
Press the
DSP/EQ
button.
POPS,
JAZZ,
ROCK
Select POPS, JAZZ, or ROCK,
depending on the genre of music
you're listening to.
USER
You can enjoy music as you set in
“EQ:USER ”.
If you press ENTER in the “EQ:USER”
menu, you will see a window where you
can change the EQ settings to your
preference.
STUDIO
Provides a sense of presence as if in a
studio.
CLUB
Simulates the sound of a dance club
with a throbbing bass beat.
HALL
Provides a clear vocal as if listening in a
concert hall.
MOVIE
Provides the feeling of a movie cinema.
CHURCH
Provides the feeling of being in a
grand church.
OFF
Select this for normal listening.
✎
NOTE
The DSP/EQ function is only available in Stereo
mode.
The DSP/EQ function is not available while
playing AC3 signal in 2.1 channel mode.
Listening to Radio
Using buttons on the Remote Control
1.
Press the
FUNCTION
button to select
FM
.
2.
Tune in to the desired station.
•
Preset Tuning 1
: You must first add a desired
frequency as a preset. Press the
STOP
(
) button
to select
PRESET
and then press the
TUNING/
CH
(
) button to select the preset station.
•
Manual Tuning
: Press the
STOP
(
) button to
select
MANUAL
and then press the
TUNING/CH
(
) button to tune in to a lower or higher
frequency.
•
Automatic Tuning
: Press the
STOP
(
) button to
select
MANUAL
and then press and hold the
TUNING/CH
(
) button to automatically
search the band.
Setting Mono/Stereo
Press the
MO/ST
button.
•
Each time the button is pressed, the
sound switches between
STEREO
and
MONO
.
•
In a poor reception area, select
MONO
for a clear, interference-free broadcast.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1.
Press the
FUNCTION
button to select
FM
.
2.
Press the
TUNING/CH
(
) button to select
<89.10>.
3.
Press the
TUNER MEMORY
button.
•
Number flashes on the display.
4.
Press the
TUNING/CH
(
) buttons
to select preset number.
•
You can select between 1 and 15 presets.
5.
Press the
TUNER MEMORY
button again.
•
Press the
TUNER MEMORY
button before
number disappears from the display.
•
Number disappears from the display and the
station is stored in memory.
6.
To preset another station, repeat steps 2 to 5.
DSP /EQ