Samsung HT-DL205, Instruction Manual

Page: 8 / 25

B
AUX IN
VIDEO
VIDEO OUT
ANTENNA
S-VIDEO
IMPEDENCE IMPEDENCE
SPEAKERS
SPEAKERS
AV OUT
AUX1 IN AUX2 IN
VIDEO
Y/C
COMP.
VIDEO OUT
ANTENNA
S-VIDEO
AM
R-FRONT-L R-REAR-L WOOFER CENTER
6 6 6 3
L
R
L
R
•
The “WAIT” message that appears on the display for about seven to eight seconds
when turning on the power or selecting a DVD function indicates a stabilization period
for optimizing the condition of your DVD player. While the message is being displayed,
other buttons remain inactive.
•
When the power is not turned on, press down the Stop ( ) button on the main unit for
over 5 seconds.
The product will be initialized to its optimum state.
•
Certain operational features such as the Speaker mode, Test tone, Volume, etc.
will not be displayed on the TV screen.
•
If your TV model is not SAMSUNG, refer to “ Remote Control Unit Setup ” on page 30.
Before Using the DVD Player
14
GB
Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
TV
TV/VIDEO
DVD
Prepe-
rations
before
use
Turn on the power
to your DVD player
and TV.
1
Select a video mode by
pressing the TV/VIDEO
button.
2
Press the DVD button
to select the DVD input
function.
3
Zoom
TV System
TV System Selection
Press the TV System button while in stop mode.
•
Each time the TV System button is pressed, “ NTSC , PAL ” are
selected in this order.
Different countries use different types of TV broadcast systems, video,
audio and channel systems.
Example : The player cannot playback PAL-encoded DVD with NTSC-TV.
13
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check the voltage.
1. Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.
2. Press the On/Standby button to switch your DVD Player system on.
V I D E O
Function
Volume
Phones
Listening on headphones
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when
using headphones.
HEADPHONE jack
Connecting your System to the Power Supply