English
Setup
English
Press the
WPS(PBC)
button on your router
within two minutes. Your product displays
the Network Selection Screen, and
automatically acquires all the network
settings values it needs and connects to your
network. When it is done, it displays an
OK
button. Press the
ENTER
button on your
remote.
One Foot Connection
You can set up the wireless connection
automatically if you have a Samsung Wireless
Router which supports One Foot Connection. To
connect using the One Foot Connection function,
follow these steps:
Press the ▲▼ buttons to select
One Foot
Connection
.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Settings
>
Move
"
Enter
'
Return
Wireless
(general)
Wired
Select a network connection type.
Connect to your wireless network automatically if your
Wireless Router supports One Foot Connection. Select
this connection type after placing the Wireless Router
within 10 inches(25cm) of product.
One Foot
Connection
WPS(PBC)
Press the
ENTER
button.
Place the Samsung Wireless Router within
25 cm (10 inches) of your product to
connect.
Wait until the connection is automatically
established.
Network Status
Check whether a connection to the network and
the Internet have been established.
Settings
Display
Audio
Network
System
Language
Security
General
Support
Network Status
<
Move
"
Enter
'
Return
MAC Address
XX:XX:XX:XX:XX:XX
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Server
0.0.0.0
Internet is connected successfully.
If you have a problem using any Internet services, contact your Internet service
provider.
KT_WLAN
IP Settings
Retry
OK
Network Settings
3.
1.
2.
3.
4.
BD-LIVE Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
Allow (All)
: The Internet connection is allowed
for all BD-LIVE contents.
Allow (Valid Only)
: The Internet connection is
allowed only for BD-LIVE contents containing a
valid certifi cate.
Prohibit
: No Internet connection is allowed for
any BD-LIVE content.
NOTE
What is a valid certifi cate?
When the product uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certifi cate back to the product.
The Internet connection may be restricted
while you are using BD-LIVE contents.
System
Initial Settings
By using the Initial Settings function, you can set
the language, Musical Auto Calibration, Network
Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of this
user manual. (See page 29)
(HDMI-CEC)
is a convenient function that offers linked
operations with other Samsung products that
have the feature.
To operate this function, connect this product to
a Samsung TV with an HDMI cable.
With on, you can operate this product
using a Samsung TV remote control and start
disc playback simply by pressing the
PLAY
(
+
)
button on the TV’s remote control.
For more information, please see the TV user
manual.
Off
: functions will not work.
On
: functions will work.
•
•
•
✎
•
•
Summary of Contents for HT-D7500W
Page 85: ......
