English
19
02
Connections
FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
VIDEO OUT
SURROUND
SUBWOOFER
CENTER
FRONT
SURROUND
ONENT OUT
VIDEO OUT
NT OUT
FRONT
SPEAKERS OUT
SPEAKER IMPEDANCE : 3
SURROUND
SUBWOOFER
CENTER
FRONT
SURROUND
Centre Speaker
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Front Speaker (L)
Installing the Speakers on the Tallboy Stand
* HT-D5530 only - Front Speakers
* HT-D5550 only - Front/Surround Speakers
Turn the Stand Base upside-down and connect it
to the Stand.
Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
CAUTION
When you use a torque screwdriver, be careful not
to put excessive force. Otherwise, it runs idle or
can be damaged. (torque screwdriver- below 15
kg.f.cm)
Connect the upper Speaker to the assembled
Stand.
Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the
rear of the speaker using a screwdriver.
This is the appearance after the speaker is
installed. Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
1.
2.
3.
Black
Red
In case of HT-D5500
* Refer to page 18 for the speakers of HT-D5530/HT-D5550.
Surround Speaker (L)
4
2
Stand
Stand
Base
1
3
Stand
Speaker
5
or
HT-D5500_ELS_1226.indd 19
HT-D5500_ELS_1226.indd 19
2011-12-26 1:23:48
2011-12-26 1:23:48