18
English
Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
1.
2.
3.
Black
Red
In case of HT-D453H
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Surround Speaker (L)
Front Speaker (L)
Center Speaker
* Refer to page 16 for the speakers of HT-D455.
Adjusting the height of the Half Tallboy Speaker
* HT-D453H only - Front Speakers
If you want to adjust the height of the speaker, loosen
3 screws on the rear of the speaker base fi rst.
Pull up the speaker in the arrow direction. (See fi gure 2)
CAUTION :
Be careful as an excessive force may result
in a physical damage.
Fit the speaker in a height adjusting hole of your choice.
For the height information, check the following examples.
(570mm for the default height)
Ex)
Hole 1: 650mm in the speaker height
Hole 2: 635mm in the speaker height
Close the cover as shown and tighten back the 3
screws.
This is after the height of the speaker is adjusted.
You can repeat these steps above at any time if you
want to readjust the height.
1.
2.
!
3.
4.
5.
1
2
3
4
5
Hole 1
Hole 2
HT-D450-XY-ENG-1228.indd 18
HT-D450-XY-ENG-1228.indd 18
2011-12-28 5:48:16
2011-12-28 5:48:16
