manualshive.com logo in svg

Samsung HT-AS720S, Instruction Manual

Share
Download
Samsung HT-AS720S Instruction Manual Download Page 30

30

•

F.L (front left)

: -10 ~ +10dB

•

CEN (center)

: -10 ~ +10dB

•

F.R (front right)

: -10 ~ +10dB

•

S.R (surround right)

: -10 ~ +10dB

•

SBR (surround back right) 

: -10 ~ +10dB

•

SBL (surround back left) 

: -10 ~ +10dB

•

S.L (surround left) 

: -10 ~ +10dB

•

S.W (subwoofer) 

: -10 ~ +10dB

Setting Speaker Level

Setting speaker level

You can set the balance and level of speakers.

√

Press 

SETUP/MENU

button, and then press the 

ENTER

button.

•

“SETUP MODE” appears on the display and goes into Setup Mode.

Press 

button to select the “LEVEL SETUP”, and then

press the 

ENTER

button.

Press 

button to select the speaker you want.

•

Each time you press 

button, F.L 

➝

CEN 

➝

F.R 

➝

S.R 

➝

SBR 

➝

SBL

➝

S.L 

➝

S.W will be selected in turn.

Press 

…†

button to set the speaker mode.

•

You can adjust it from -10 to +10dB by 1 step.

•

The sound gets quieter at -10dB and louder at +10dB.

1

2

3

4

To exit setup mode

•

Wait for about 5 seconds or press 

SETUP/MENU

button.

“SETUP OFF” appears on the display and Setup Mode is exited.

1

Press 

SPK LEVEL

button to select the speaker you want. 

•

Each time you press this button, F.L 

➝

CEN 

➝

F.R 

➝

S.R 

➝

SBR 

➝

SBL 

➝ 

S.L

➝

S.W 

➝

SPK LVL OFF will be selected in turn.

2

Press 

…† 

button to set the speaker level you want.

•

You can adjust it from -10 to +10dB by 1 step.

•

The sound gets quieter at -10dB and louder at +10dB.

Using the SPK LEVEL  button

HT-AS720S-XAA-ENG  2007.8.21  6:8 PM  Page 30

Summary of Contents for HT-AS720S





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands