Samsung HT-AS601 Instruction Manual Download Page 46

Page: 46 / 55

Connect the headphone to the headphone jack and listen to
music.

Use headphones (not supplied) for private listening pleasure.

Press the MUTE button.

•

MUTE

appears on the display.

Press “0” button five times and then
press ENTER button.

Press

…†

buttons to select “YES”.

•

The unit will turn automatically back on in 5 seconds.

•

Do not turn the volume up too high when you use headphones as It
may damage your hearing.

Reset Function

Using Headphone

REMOTE CONTROL

Press the DIMMER button.

•

Each time you press this, the brightness of the display will be adjusted.

You can adjust the brightness of the display.

Adjust the Display

REMOTE CONTROL

MISCELLANENOUS

•

Using the RESET function will erase all stored settings.

•

Do not use this unless necessary.

Caution!

1
2
3

HT-AS601B SEA 2005.4.15 9:33 AM Page 47

Summary of Contents for HT-AS601
























































Search results

Summary of Contents for HT-AS601

Reviews:

Related manuals for HT-AS601

Brands by name

Popular brands

Samsung HT-AS601, Instruction Manual

Search results

Summary of Contents for HT-AS601

Reviews:

Related manuals for HT-AS601

Brands by name

Popular brands