ENG - 16
What are the BT READY and BT PAIRING statuses?
•
BT READY
: In this mode, you can search for previously connected TVs or connect to the Soundbar
from a previously connected mobile device.
•
BT PAIRING
: In this mode, you can connect to a new device. (While in “
BT
” mode, press and hold the
(Source)
button for more than 5 seconds on the right side of the Soundbar or on the remote
control.)
NOTES
•
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft.
•
The Soundbar automatically turns off after 5 minutes in the Ready state.
•
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
•
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
•
The Soundbar supports SBC data (44.1kHz, 48kHz).
•
Connect only to a Bluetooth device that supports the A2DP (AV) function.
•
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function.
•
Once you have paired the Soundbar to a Bluetooth device, selecting “
[AV] Samsung Soundbar
MSxxxx
” from the device’s scanned devices list will automatically change the Soundbar to “
BT
”
mode.
– Available only if the Soundbar is listed among the Bluetooth device’s paired devices.
(The Bluetooth device and the Soundbar must have been previously paired at least once.)
•
The Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is
displaying “
BT READY
”.
