background image

5

Move the joystick right to select off, then

move the joystick up or down to select
“on”.
When any of the timers are set, the
“Timer” LED will illuminate (front or side
panel of TV.).

6

When you are finished, move the joy-

stick right.

7

If you want to set the Off time, move the

joystick down to select the “Off Time”.
Set the “Off Time” just as you set the
“On Time”.

8

If you want to set the volume level or

channel when the TV turns on, move the
joystick down to select “On Timer Vol.”
or “On Timer CH”.  Move the joystick
right to set the volume level or to select
the channel you want when the TV turns
on. Press the Menu button to return to
normal viewing.

Setting the Sleep Timer

You can set your TV to automatically turn off after a preset interval. 

1

Press the Sleep button on the remote con-

trol.

2

You’ll see “Off” at the bottom of the

screen. Press the Sleep button to select
the time interval for the TV to stay on.
The interval ranges from 10 to 360 min-
utes. 

Operation

44

BP68-00030A-3  4/15/05  8:32 PM  Page 44

Summary of Contents for HLM4365W - HLM - 43" Rear Projection TV

























































































Reviews: