Samsung HL-R5688W - 56" Rear Projection TV, Owner'S Instructions Manual

Page: 121 / 144

English - 121
10) When multiple devices are connected, some devices may appear and then disappear periodically
in the Device List. This is because some devices malfunction when multiple devices are connected.
If this occurs, you have to discover and remove the defective device from the connection by
removing the devices one by one.
11) When multiple devices are connected, the response time may be relatively long when selecting a
device. This may happen when there is a device(s) that malfunctions and degrades the 1394
connection speed.
At this time, some of the functions of AVHDD or DVHS may not work, and the stream connection may
fail. If this occurs, you have to discover and remove the defective device from the connection by
removing the devices one by one.
12) Copy Protection
- You can record a Copy-Free, or Copy-One-Generation screen.
- Although you cannot record a Copy-No-More, or Copy-Never screen, you can view it through
another device.
- If you change the channel to a ‘copy never’ channel while recording a ‘copy free’ channel, the
recording is automatically stopped in some devices. Even if the program was recorded, you will not
be able to view the recorded ‘copy never’ channel. At this time, therefore, the user has to manually
stop the recording.
13) When multiple devices are connected, and a device malfunctions while playing DVHS or AVHDD,
the user may experience interrupted screen play.
14) When playing and recording a program simultaneously using AVHDD, and the program is copy
protected, the program may not play depending on whether the AVHDD device supports
simultaneous copy protection.
15) When AVHDD or DVHS is being played, and you press the Pause button, some products may show
the "No Signal or Weak Signal" message on the TV screen instead of a still picture as there is no
video stream from the product.
16) If the number of connected IEEE 1394 devices exceeds 10, it may cause abnormal operation.
- Yes and Play may not operate smoothly, if you play after recording.
- Yes and the Play, Record and Copy functions do not work properly.
- Disconnect the malfunctioning device and then try again.
Copy information
Message
Copy_free
No_more_copies
Copy_one_generation
Copy_never
Descriptions
Able to copy.
Unable to copy anymore.
Able to copy once.
Unable to copy.
BP68-00520A-00Eng(108~125) 6/3/05 3:57 PM Page 121