10
English
6
RJP
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
7
HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
8
ANT IN
‒ To view television channels correctly, the TV must receive a signal from one of the following sources:
‒ An outdoor antenna / A cable television system
9
DATA
‒ Used to support data communication between the TV and the SBB.
‒ Connects using RJ-12 TV type plugs.
0
HP-ID
Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. See page
19. When connecting Headphone to Headphone Box, it works same as Headphone function.
!
COMPONENT / AV IN
–
Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as
VCRs.
–
Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or
Component devices.
–
The
COMPONENT IN
jack is also used as the
VIDEO 1
jack.
–
Connect component video cables (not supplied) to the component jacks ("PR", "PB", "Y") on the rear of your TV
and the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks
and cables.
–
If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
–
The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
–
For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on an external device.
–
When your are connecting a composite (AV) device to
AV IN [Y/Video]
, connect the video cable (Yellow) to the
AV IN [Y/VIDEO]
jack (Green/Yellow).
@
VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
#
VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
