07 Setting the Hotel Option Menus
To access the
Hotel Option
menus, press
MUTE
>
1
>
1
>
9
>
Select
E
buttons on your remote control.
To control the TV functions in the
Hotel Option
menu, the TV has two modes, the
Standalone
mode and the
Interactive
mode. The menu items that differ between the modes are listed below. All other items appear in both modes.
Menu items in the
Standalone
mode only:
•
SI Vendor
:
Smoovie
/
SSCP
•
Home Menu
/
REACH Solution
/
Room Number
and its submenus.
Menu items in the
Interactive
mode only:
•
SI Vendor
: Samsung and other vendors.
After a menu appears, follow these general directions to navigate and change values:
•
Use the directional buttons on the remote control to move from menu item to menu item.
•
Press the
Select
E
button on the remote control to select a menu item. The screen displays that menu item only.
•
Press the left or right directional button to change a value. The right directional button increases numerical values.
The left arrow button decreases numerical values.
•
When the screen is displaying one menu item, you can press the up or down directional button to display the next
or previous menu item.
•
Press the
RETURN
or
MENU
button to exit the current menu item and go to a higher menu level or the main menu.
•
To exit a
Hotel Option
menu, turn off the TV, and then turn it on again. Any changes you made are saved except SI
(System Integration) vendor. For changes to SI vendor, you must turn the TV off, wait until the power indicator at the
bottom of the TV glows steadily. And then unplug the TV, wait for the power indicator to go off, and then plug the TV
in again.
To change menus between the
Interactive
mode and the
Standalone
mode, follow the steps below:
1.
Highlight the
Hospitality Mode
menu item in the top left corner of the menu.
2.
Press the
Select
E
button on the remote control. Only the
Hospitality Mode
menu item is displayed.
3.
Press the left or right directional button to change the
Hospitality Mode
item from
Standalone
to
Interactive
or
from
Interactive
to
Standalone
.
4.
Press the
RETURN
or
MENU
button on the remote control. The entire menu re-appears with your selection
displayed in the
Hospitality Mode
field.
– After you have set the values in one TV, you can clone those values to multiple TVs.
– For more information about the USB cloning refer to page 31.
English - 23
