To register this product please visit
www.samsung.com/register.
Quick Setup Guide
List of Parts
1
2
3
4
Remote Control (AA59-00817A) &
Batteries (AAA x 2)
Power Cord
Owner’s Instructions
Safety Guide
Wall Mount Adapter
(Depending on the model)
Holder-Wire stand (32”)
Installing the LED TV Stand
Components
When installing the stand, use the provided components and parts.
◆
HG32NE460
A
X 8 (M4 X L14)
• Stand
• Guide Stand
• Screws
C
X4 (M4 X L12)
B
A
DO NOT USE
GREASE
Attention
DO NOT USE
CHEMICALS
DO NOT USE
OIL
✎
Place a soft cloth over the table to protect the TV, and
then place the TV on the cloth screen-side down.
✎
Insert the Stand Guide into the slot on the bottom of
the TV.
✎
Slide and assemble it to the end line in the direction
of arrow.
1
2
3
C
X4 (M4 X L14)
✎
Tight the bottom of the screw first, and stow the upper side of screw last.
✎
Progress the assembly of screw in the manual’s order.
Wall Mount Kit Specifications (VESA)
TV
Wall mount
Bracket
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other
than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal
injury.
➣
Standard dimensions for wall mount kits are shown in the table below.
➣
Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
➣
Do not use screws that do not comply with the VESA standard screw specifications.
➣
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the TV set.
➣
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
➣
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
➣
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
➣
Do not mount the TV at more than a 15 degree tilt.
➣
Always have two people mount the TV onto a wall.
Product Family
TV size in
inches
VESA screw hole
specs (A * B) in
millimeters
Standard Screw
Quantity
LED-TV
32-40
200 × 200
M8
4
Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock.
License
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the
Symbol, DTS in combination with the Symbol, DTS Premium Sound|5.1, DTS Digital Surround, DTS
Express, and DTS Neo2:5 are registered trademarks or trademarks of DTS, Inc. in the United States
and/or other countries.
ⓒ
DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered
trademarks or trademarks of DTS, Inc. in the United States and/or other countries.
ⓒ
DTS, Inc. All
Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under
license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
Dimensions
HG32NE460
1
2
5
4
3
6
7
9
8
(unit: mm)
1
2
3
4
5
6
7
8
9
745.4
699.7
394.3
433.9
442.2
484.2
57.9
163.4
69.0
HG40NE460
7
9
8
1
2
5
4
3
6
(unit: mm)
1
2
3
4
5
6
7
8
9
922.7
880.1
802.2
487.4
530.7
555.1
40.5
72.0
170.3
Specifications
Environmental onsiderations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Model Name
HG32NE460S
HG40NE460S
Display Resolution
1366 x 768
1920 x 1080
Screen Size
(Diagonal)
32” Class
(31.5” measured diagonally)
40” Class
(39.5” measured diagonally)
Sound (Output)
5W x 2
10W x 2
Dimensions (WxDxH)
Body
With stand
745.4 x 69.0 x 442.2 mm
745.4 x 163.4 x 484.2 mm
922.7 x 72.0 x 530.7 mm
922.7 x 170.3 x 555.1 mm
Weight
Without Stand
With Stand
4.0 kg
4.4 kg
6.7 kg
6.9 kg
➣
Design and specifications are subject to change without prior notice.
➣
This device is a Class B digital apparatus.
WARNING
:
This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
Hotel Plug & Play
The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and
Picture Mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service
Reset.
◆ Region Settings
– Initially highlighted: US
you can select the region you want and next
◆
TV Basic Setup
– Initially highlighted: TV Basic Setup
Start basic setup to use your TV
– If you select the Cloning Mode
Clone system settings from a USB flash drive or server
to your TV. Make sure that a USB flash drive is connected
before you attempt to clone system settings from it.
– If you select Factory Menu
End setup and go directly to the factory you should
power off and on to start the TV.
– If you select commercial TV Mode
Start basic setup to use your TV in a commercial
business.
◆
Select your Language OSD
– Initially highlighted: Español
– Display time: OSD time out and operation are the same
as Samsung’s consumer TV models.
– If you press the Enter key, the “Configure your TV” OSD
appears.
◆
Configure your TV OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can
choose Dynamic or Standard Picture mode.
◆ Auto Program Mode OSD
– If you press the Enter key, the TV automatically searches
for channels.
◆
Set Clock Mode and Time Zone OSD
– Initially highlighted: Clock Mode : Auto, Time Zone :
South and Southeast
– If the TV will be tuned to digital broadcast channels, and
these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and
time automatically.
– If the TV will not be tuned to digital broadcast channels,
set the Clock Mode to Manual, and then set the date and
time on the TV manually.
– Select your time zone on the map appears.
◆
UI Scenario
TV Controller
The TV’s Controller on the bottom right side of the TV, lets you control the TV without the remote control.
: Turns the TV on or off.
/
: Changes channels.
/
: Adjusts the volume.
: Displays and selects the available video sources.
Control Menu
Remote control sensor/TV Controller
✎
If you press it first, the control menu appears. You can select the function by pressing and holding the TV’s controller.
✎
The product color and shape may vary depending on the model.
✎
With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for
example). It is best to unplug the power cord.
-02
STOP
Please do not return
this unit
If you are having problems operating this TV,
Please call;
US: 1-866-894-0524
CANADA: 1-800-726-7864
For web support please visit
http://www.samsung.com/us/business
5
2EA
B
C
x4(M4 X L12)
• Stand
• Guide Stand
• Screws
✎
Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.
✎
Make sure that at least two people lift and move the LED TV.
✎
When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.
✎
The number of screws may differ depending on the model.
!
!
!
C
(M4 X L12)
x4
!
!
!
1
4
2
5
3
6
B
C
Viewing the Connection Panel
➣
The product color and shape may vary depending on the model.
3
HDMI IN 2
(DVI)
4
2
5
6
3
(5V 0.5A
)/CL
ONIN
G
1
AUDIO
AUDIO
OUT
EX-LINK
HDMI IN
2 (ARC)
3
HDMI IN 1
(DVI)
HDMI IN 2
(DVI)
2
2
4
(5V 0.5A)
/CLONING
1
AUDIO
AUDIO
OUT
EX-LINK
HDMI IN 2
(ARC)
ANT IN
AIR/CABLE
AV IN
AUDI
O
VIDEO
ANT IN
HDMI IN
1 (DVI
)
5
6
AV IN
AUDIO
VIDE
O
1
AV IN
2
USB (5V 0.5A) / CLONING
3
HDMI IN 1 (DVI), 2 (ARC)
4
ANT IN
5
EX-LINK
6
AUDIO
OUT
3
HDMI IN 2
(DVI)
4
2
5
6
3
(5V 0.5A
)/CL
ONIN
G
1
AUDIO
AUDIO
OUT
EX-LINK
HDMI IN
2 (ARC)
3
HDMI IN 1
(DVI)
HDMI IN 2
(DVI)
2
2
4
(5V 0.5A)
/CLONING
1
AUDIO
AUDIO
OUT
EX-LINK
HDMI IN 2
(ARC)
ANT IN
AIR/CABLE
AV IN
AUDI
O
VIDEO
ANT IN
HDMI IN
1 (DVI
)
5
6
AV IN
AUDIO
VIDE
O
1
USB (5V 0.5A) / CLONING
2
HDMI IN 1 (DVI), 2 (ARC)
3
AV IN
4
AUDIO
OUT
5
EX-LINK
6
ANT IN
AIR/CABLE
When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel List
are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.
Notice
Sound Bar
◆
Samsung Sound-Bars and Hotel TVs in 2016
1. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung
Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV’s sound through
the Sound-Bar.
2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is
turned on.
– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.
– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
3. Models supporting the ARC function are listed below:
– Sound-Bars: HW-E350/E450/E550
HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75
◆
Setting the Sound-Bar to Hotel Mode.
4. Set the following Hotel menu options:
– Hotel option > System > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume = User Defined.
– Hotel option > Power On > Power On Volume Num > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI2 port (supporting ARC) on the
hospitality TV.
6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV,
and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
– Power On/Off is synchronized with the TV
– HDMI_CEC defaults to On
– Functions through the “HDMI OUT” port only
– Disables the “Input mode” key on the VFD to prevent unexpected audio-source changes.
– Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar’s Power On Volume and
Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV’s Hotel options menu.
Example: If the TV’s Power On Volume=20 and Max Volume=90, then the Sound Bar’s Power On Volume=10 and Max Volume=45.
◆
HG40NE460
Wall mount
Adapter
HG32NE460
HG40NE460
A
1EA
If you select TV Basic
Setup or Commercial
TV Mode
if you
select
Factory
Menu
Select your language
Press Power OFF to exit.
complete setup and use your
TV if you select Commercial TV
Mode before
If you select TV Reset, the TV resets all
values to their factory defaults and then
displays the Hospital Plug & Play menu.
Go to the first Hospital Plug & Play
screen below.
Region Settings
NONE
US
KOR
SD_MEXICO
SD_CANADA
Country List
USA
Change the region settings if you are located in North
America, Latin America, or Europe. Your TV might not function if the
region settings are not correctly congigured. When the region
settings are changed, your TV will automatically restart to apply them.
c
TV Installation Type
TV Basic Setup
Cloning Mode
Factory Menu
Commercial TV Mode
Start basic setup to use
your TV.
Select your TV installation type.
c
Select Solution
Standalone (Home Menu)
LYNK REACH
Interactive (STB)
Select if you do not want
to connect to a specific
solution and only want
to use the TV.
Select a solution to install on your TV.
c
Clone Settings
Clone system settings from a USB flash drive to your TV. Skip this step if you want to clone system
settings from a server.
A USB flash drive is mot connected. Please check and try again.
Clone from USB
Solution Setup
Room Number
Group All
Group ID
Enter The room number.
Only numbers and
English letters can be
entered.
Set options regarding the selected solution.
Setup Complete!
Your TV is now ready to use.
Done
Select your Language
Select your language to start the on screen setup.
Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
English
Español
Français
age
Press the arrow
buttons
c
Auto Program
Auto Program complete.
156 channels are memorized
Change Settings
Scan Again
DTV Air
0
Air
DTV Cable
Cable
12
82
62
Select the channel
band to use for Auto
Program
After Searching
channels.
Auto Program
Antenna
Both
Digtal Cable System
STD
Analog Cable System
STD
Select current connected
antenna.
To get channels, set the options below then select
Scan.
Scan
Auto Program
Auto Program is
channels for you...
Air 21
6%
Stop
DTV Air
0
Air
DTV Cable
Cable
0
0
0
Select Clock Mode, DST, and your Time Zone
Select Picture mode
Configure your TV
Picture Mode
Standard
Choose a picture mode
that best suits your
viewing enviroment.
Select your information in all of the categories
below.
Setup Complete!
Your TV is now ready to use.
Done
Clock
-- : -- --
Select whether to apply daylight saving time
Set current date and time
Clock settings
Auto
Date
-- / -- / ----
Time
-- : -- --
DST
Off
Time Zone
Eastern
Standalone
Hospitality Option Menu
appears.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
ATV cable AGC Gain
OFF
DTV OpenCable AGC Gain
Sound Bar Out
OFF
Contact Samsung
Standby LED
ON
Default
Default
TV Reset
if you choose
Cloning Mode
if you choose
Standalone or
Interactive
Complete cloning and next
if you choose
LYNK REACH
P
HE460_ZX_QSG_BN68-07996M-02_L02.indd 1
2016-06-07 오후 3:27:19
