31
O
P E R AT I O N
4
A crosshair pattern will appear on
the screen.
After moving the cursor to the
position you want to adjust using
the
▲
, , ,
▼
buttons on the
remote control, adjust Red
Convergence by pressing the
VOL +/
VOL -/CH
/CH
.
5
If a horizontal red line is visible, use
CH
and
CH
buttons to move
the line so that it is superimposed on
the horizontal center-line (i.e., make
a single horizontal line that is as
white as possible.)
6
If a vertical red line is visible, use
the
VOL +
and
VOL -
buttons to
move the line so that it is superim-
posed on the vertical-center line
(i.e., make a single vertical line that
is as white as possible.)
Adjust Red Convergence
7
For ‘Blue’ adjustment, do the same as the above.
After the red convergence is correctly adjusted, press
EXIT
to exit all
the menus.
Red Adjust
Move
Adjust Blue
Adjust
Return
Red Adjust
Move
Adjust Blue
Adjust
Return
Red Adjust
Move
Adjust Blue
Adjust
Return
00137A-CHAPTER 3 2004/10/18 05:25 PM Page 31
