ENG - 22
2.
Align the
Wall Mount Guide’s
Center Line
with the center of your TV (if you are
mounting the Soundbar below your TV), and
then fix the
Wall Mount Guide
to the wall
using tape.
• If you are not mounting below a TV, place
the
Center Line
in the center of the
installation area.
Center Line
3.
Push a pen tip or sharpened pencil tip
through the center of the
A-TYPE
images on
each end of the Guide to mark the holes for
the supporting screws, and then remove the
Wall Mount Guide
.
4.
Using an appropriately sized drill bit, drill a
hole in the wall at each marking.
• If the markings do not correspond to the
positions of studs, make sure you insert
appropriate anchors or mollies into the
holes before you insert the support
screws. If you use anchors or mollies,
make sure the holes you drill are large
enough for the anchors or mollies you use.
5.
Push a screw (not supplied) through each
Holder-Screw
, and then screw each screw
firmly into a support screw hole.
6.
Install the 2
Bracket-Wall Mounts
in the
correct orientation on the bottom of the
Soundbar using 2
Screws
.
• Remove the
Holder Feet
and
Holder-Supports
if they are attached.
• When assembling, make sure the hanger
part of the
Bracket-Wall Mounts
are
located behind the rear of the Soundbar.
Rear of Soundbar
Right end of Soundbar
Summary of Contents for HARMAN/KARDON HW-Q60R
Page 1: ...USER MANUAL HW Q60R...
Page 36: ...HW Q60R MANUEL D UTILISATEUR...