Samsung HABANA NP-P50 Series Service Manual Download Page 97

Page: 97 / 160

5- 10

5. Troubleshooting

◆

Main System Troubles

5. The system is not turned off.

→

Check if the AC adapter LED is lit and if the adapter is properly connected to the system.

(Check the adapter LED)

→

If the AC adapter is not connected, check the charge status of the battery. Even if the battery

is charged, if the remaining battery charge is too low, the system may not be turned on.

(As the following figure shows, press the PUSH button on the battery and check the remaining

battery charge via the LEDs)

→

Check if there are any alien substances in the Power switch.

→

Check if the LED board is out of order or if the LED board and the main board is properly

connected.

→

Replace the main board.

- This document cannot be used without the authorization of Samsung -

Summary of Contents for HABANA NP-P50 Series

































































































































































Search results

Summary of Contents for HABANA NP-P50 Series

Reviews:

Related manuals for HABANA NP-P50 Series

Brands by name

Popular brands

Samsung HABANA NP-P50 Series, Service Manual

Search results

Summary of Contents for HABANA NP-P50 Series

Reviews:

Related manuals for HABANA NP-P50 Series

Brands by name

Popular brands