168
I can't hear the sound clearly
Testing the Sound
MENU
>
Support
>
Self Diagnosis
>
Sound Test
Try Now
Before you review the list of problems and solutions below, make sure that the
Speaker Select
menu
item is set to
TV Speaker
, and then listen to the speakers again. If the TV still does not play audio,
run the Sound Test. The
Sound Test
uses a built-in melody to check for sound problems. If the TV
does not play sound during the
Sound Test
, or the sound is distorted, there may be a problem with
the TV. Contact Samsung’s Call Centre for assistance. If the TV plays the Sound Test melody without
distortion, there may be a problem with an external device. Please check the connections. If the
problem persists, refer to the external device’s user manual.
"
If you can't hear the melody or there is a problem, make sure
MENU
>
Sound
>
Speaker Settings
>
TV
Sound Output
is set to
TV Speaker
and then try again. If the problem persists, there may be a problem with
the TV. Contact Samsung’s Call Centre for assistance.
"
If the melody is played, there may be a problem with the external device. Please check the connections. If
the problem persists, refer to the external device’s user manual.
The Problem
Try this!
There is no sound or
the sound is too low at
maximum volume.
Check the volume control of the device (cable/satellite box, DVD, Blu-ray, etc.)
connected to your TV.
The picture is good but
there is no sound.
Set
MENU
>
Sound
>
Speaker Settings
>
TV Sound Output
to
TV Speaker
.
If you are using an external device, check the device’s audio output option. (For
example, you may need to change your cable box’s audio option to HDMI if the
box connected to your TV is using an HDMI cable.)
If you are using a DVI - HDMI cable, a separate audio cable is required.
If your TV has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by disconnecting and then reconnecting the device’
s power cable.
The speakers are making
an odd sound.
Make sure that the audio cable is connected to the correct audio output
connector on the external device.
For antenna or cable connections, check the signal information. A low signal
level may cause sound distortions.
Run
Sound Test
(
MENU
>
Support
>
Self Diagnosis
>
Sound Test
).