Samsung H026EAV Service Manual Download Page 110

Page: 110 / 158

Samsung Electronics

11-2 Main Function

11-2-1 Basic Function

Mode

Explanation

Remark

Selecting the

Automatic

Operating Mode

1. If necessary, press (On/Off) button.

2. To select the AUTO mode, press the button until is

displayed at the top of the wireless remote controller.

3. To adjust the temperature, press the buttons one or more

times until the required temperature is displayed.

Possible temperatures are between 18˚C and 30˚C inclusive.

Cooling Your Room

1. If necessary, press (On/Off) button.

2. To select the COOL mode, press the button until
is displayed at the top of the wireless remote controller.

3. To adjust the temperature, press the buttons one or more

times until the required temperature is displayed.

Possible temperatures are between 18˚C and 30˚C inclusive.

11-3

24867A(1)_TH026EAV_1.indd 1

2006-05-09 ｿﾀﾈﾄ 2:56:47

Summary of Contents for H026EAV































































































































































Search results

Summary of Contents for H026EAV

Reviews:

Related manuals for H026EAV

Brands by name

Popular brands

Samsung H026EAV, Service Manual

Search results

Summary of Contents for H026EAV

Reviews:

Related manuals for H026EAV

Brands by name

Popular brands