Samsung GT-E1081T, User Manual

Page: 2 / 2

Install the SIM card and battery
1. Remove the battery cover and insert the SIM card.
2. Insert the battery and replace the battery cover.
Charge the battery
1. Plug the supplied travel adapter.
2. When charging is finished, unplug the travel adapter.
Do not remove the battery from the phone before
unplugging the travel adapter first. Otherwise, the phone
may be damaged.
Instructional icons
Note : notes, usage tips, or additional information
→
Followed by
: the order of options or menus you
must select to perform a step; for example: In Menu
mode, select Messages → Create new message
(represents Messages , followed by Create new
message )
[ ]
Square brackets : phone keys; for example: [ ]
(represents the Power/Menu exit key)
< >
Angled brackets : softkeys that control different
functions at each screen; for example: < OK >
(represents the OK softkey)
Turn your phone on or off
To turn your phone on,
1. Press and hold [
].
2. Enter your PIN and press < OK > (if necessary).
3. When the setup wizard opens, customise your phone
as desired following the screen.
To turn your phone off, repeat step 1 above.
Access menus
To access your phone's menus,
1. In Idle mode, press <
Menu > to access Menu mode.
You may need to press the Confirm key to access Menu
mode depending on your region or service provider.
2. Use the Navigation key to scroll to a menu or option.
3. Press <
Select >, < Save >, or the Confirm key to
confirm the highlighted option.
4. Press < Back > to move up one level; Press [ ] to
return to Idle mode.
When you access a menu requiring the PIN2, you must
enter the PIN2 supplied with the SIM card. For details,
contact your service provider.
Samsung is not responsible for any loss of passwords
or private information or other damages caused by
illegal software.
•
•
Make a call
1. In Idle mode, enter an area code and a phone
number.
2. Press [ ] to dial the number.
3. To end the call, press [ ].
The volume through mono earphones is very low
orvirtually inaudible. Use stereo earphones only.
Answer a call
1. When a call comes in, press [ ].
2. To end the call, press [ ].
Adjust the volume
To adjust the volume of the ringtone
1. In Menu mode, select Settings → Profiles .
2. Scroll to the phone profile you are using.
If you are using the silent profile, you are not allowed to
adjust the volume of the ringtone.
3. Press < Options > → Edit .
4. Select Volume and scroll to Call alert .
5. Scroll left or right to adjust the volume level.
6. Press <
Save >.
To adjust the volume of voice during a call
While a call is in progress, press the Navigation key up
or down to adjust the volume.
In noisy environments, you may have difficulty hearing
the calls while using the speakerphone feature. For better
audio performance, use the normal phone mode.
Change your ringtone
1. In Menu mode, select Settings → Profiles .
2. Scroll to the profile you are using.
3. Press < Options > → Edit .
4. Select Call ringtone .
5. Select to a ringtone and press < Save >.
To switch to another profile, select it from the list.
Call a recently dialled number
1. In Idle mode, press [ ].
2. Scroll left or right to a call type.
3. Scroll up or down to a number or name.
4. Press the Confirm key to view details of the call or
[ ] to dial the number.
Enter text
To change the text input mode
Press and hold [ ] to switch between T9 English
and ABC modes or between T9 Hindi and Hindi
modes.
Press [ ] to switch to ABC mode and Number
mode, or change case in ABC mode.
Press [ ] to switch to Symbol mode.
Press and hold [ ] to select an input mode or
change the input language. Depending on the Indian
language you select, the key map will change.
T9 English mode
1. Press the appropriate alphanumeric keys to enter an
entire word.
2. When the word displays correctly, press [ 0 ] to insert
a space. If the correct word does not display, press
the Navigation key up or down to select an alternate
word.
ABC mode
Press an appropriate alphanumeric key until the
character you want appears on the display.
•
•
•
•
T9 Hindi mode
1. Press the appropriate alphanumeric keys to enter an
entire word.
2. When the word displays correctly, press [ 0 ] to insert
a space. If the correct word does not display, press
the Navigation key up or down to select an alternate
word.
Hindi mode
Press an appropriate alphanumeric key until the
character you want appears on the display.
Number mode
Press an appropriate alphanumeric key to enter a
number.
Symbol mode
Press an appropriate alphanumeric key to enter a
symbol.
To move the cursor, press the Navigation key.
To delete characters one by one, press < Clear >.
To delete all of the characters, press and hold < Clear >.
To insert a space between characters, press [ 0 ].
To enter symbols or punctuation marks, press [ 1 ].
•
•
•
•
Add a new contact
Your phone is preset to save contact to the phone
memory. To change the memory location, in Menu mode,
select Settings → Application → Phonebook → Save
new contact to → a memory location.
1. In Idle mode, enter a phone number and press
< Options >.
2. Select Create contact .
3. Select a number type (if necessary).
4. Enter contact information.
5. Press the Confirm key to add the contact to memory.
Send and view messages
To send a text message
1. In Menu mode, select Messages → Create new
message .
2. Enter a destination number and scroll down.
3. Enter the message text.
► Enter text
4. Press the Confirm key to send the message.
To view text messages
1. In Menu mode, select Messages → Inbox .
2. Select a text message.
Make fake calls
You can simulate an incoming call when you want to get
out of meetings or unwanted conversations.
To make a fake call,
In Idle mode, press and hold the Navigation key
down .
When the keys are locked, press the Navigation key
down four times .
Use the mobile tracker 2.0
To activate the mobile tracker
When someone inserts a new SIM card in your phone,
the mobile tracker feature will automatically send the
contact number to two recipients to help you locate and
recover your phone. To activate the mobile tracker,
1. In Menu mode, select
Settings → Security →
Mobile tracker 2.0 .
2. Press the Confirm key to set a phone lock password.
3. Enter a new 8-digit password and press < OK >.
4. Enter the new password again and press < OK >.
5. Select Settings .
6. Enter a new 8-digit password for the mobile tracker
and press < OK >.
•
•
7. Enter the new password again and press < OK >.
8. Scroll left or right to On .
9. Scroll down and press the Confirm key to open the
recipient list.
10. Press the Confirm key to open your contact list.
11. Scroll to a contact and press the Confirm key.
12. Select a number (if necessary).
13. Press <
Options > → Save to save the recipients.
14. Scroll down and enter the sender's name.
15. Press the Confirm key → < Accept >.
To change the password for the mobile tracker, select
Change Mobile tracker 2.0 password .
To access a remote phone
If a remote phone has the mobile tracker 2.0 feature
and it is activated, you can get contacts, delete data,
forward calls, and get location information of the remote
phone.
To get contacts of the remote phone,
1. In Menu mode, select
Settings → Security →
Mobile tracker 2.0 → Access remote phone .
2. Enter the phone number of the remote phone and
scroll down.
3. Enter the mobile tracker password of the remote
phone and press < OK >.
4. Select Get contact .
5. Enter the name of the contact you want to retrieve
and press < Send >.
Your phone will receive a text message with the
contact information.
To delete data on the remote phone,
1. In Menu mode, select
Settings
→
Security
→
Mobile tracker 2.0 → Access remote phone .
2. Enter the phone number of the remote phone and
scroll down.
3. Enter the mobile tracker password of the remote
phone and press < OK >.
4. Select Delete user data .
5. Press < Yes >.
A call log list, Phonebook contacts, and all
messages of the remote phone will be deleted.
To forward calls to another phone,
1. In Menu mode, select
Settings → Security →
Mobile tracker 2.0 → Access remote phone .
2. Enter the phone number of the remote phone and
scroll down.
3. Enter the mobile tracker password of the remote
phone and press < OK >.
4. Select Call diverting .
5. Enter the phone number to which incoming calls of
the remote phone will be forwarded.
6. Press < Options > → Activate .
All incoming calls of the remote phone will be
forwarded to the new phone number.
To get location information,
1. In Menu mode, select
Settings → Security →
Mobile tracker 2.0 → Access remote phone .
2. Enter the phone number of the remote phone and
scroll down.
3. Enter the mobile tracker password of the remote
phone and press < OK >.
4. Select Get location information .
5. Press < Send >.
You will receive a text message with the remote
phone's location information.
Activate and send an SOS message
In an emergency, you can send SOS messages to your
family or friends for help.
To activate the SOS message
1. In Menu mode, select Messages → Settings →
SOS messages → Sending options .
2. Scroll left or right to On .
3. Scroll down and press the Confirm key to open the
recipient list.
4. Press the Confirm key to open your contact list.
5. Select a contact.
6. Select a number (if necessary).
7. When you are finished selecting contacts, press
< Options > → Save to save the recipients.
8. Scroll down and set the number of times to repeat the
SOS message.
9. Press < Save > → < Yes >.
To send an SOS message
1. With the keys locked, press [ ] four times to send
an SOS message to preset numbers.
The phone switches to SOS mode and sends the
preset SOS message.
2. To exit SOS mode, press [ ].
Set and use alarms
To set a new alarm
1. In Menu mode, select Alarms .
2. Select an empty alarm location.
3. Set alarm details.
4. Press <
Save >, or press < Options > → Save .
To stop an alarm
When the alarm sounds,
Press < OK > or the Confirm key to stop the alarm
without snooze.
Press <
OK > or the Confirm key to stop the alarm with
snooze, or press < Snooze > to silence the alarm for
the snooze period.
To deactivate an alarm
1. In Menu mode, select Alarms .
2. Select the alarm you want to deactivate.
3. Scroll left or right to
Off .
4. Press < Save >.
If the battery has been removed, the scheduled alarm
may not sound.
•
•
Activate the torch light
The torch light feature helps you see in dark places by
making the display and backlight as bright as possible.
To activate the torch light, press and hold the Navigation
key up in Idle mode. To deactivate the torch light, press
and hold the Navigation key up in Idle mode.
Battery cover
Battery
SIM card
To AC power outlet
GT-E1081T_UM_India English.indd 2 2010-01-06 ¿ÀÈÄ 5:05:38