Samsung GT-E1080W, User Manual

Page: 2 / 2

Declaration of Conformity (R&TTE)
We, Samsung Electronics
declare under our sole responsibility that the product
GSM Mobile Phone : GT-E1080W
to which this declaration relates, is in conformity with the following standards and/or
other normative documents.
SAFETY EN 60950-1 : 2006+A11 : 2009
SAR EN 50360 : 2001
EN 62209-1 : 2006
EMC EN 301 489-01 V1.8.1 (04-2008)
EN 301 489-07 V1.3.1 (11-2005)
RADIO EN 301 511 V9.0.2 (03-2003)
We hereby declare that [all essential radio test suites have been carried out and that]
the above named product is in conformity to all the essential requirements of Directive
1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV]
of Directive 1999/5/EC has been followed with the involvement of the following Notified
Body(ies):
BABT, Forsyth House,
Churchfield Road,
Walton-on-Thames,
Surrey, KT12 2TD, UK*
Identification mark: 0168
The technical documentation kept at :
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK*
2010.12.15
Joong-Hoon Choi / Lab Manager
(place and date of issue) (name and signature of authorised person)
* It is not the address of Samsung Service Centre. For the address or the phone
number of Samsung Service Centre, see the warranty card or contact the retailer
where you purchased your product.
Send and view messages
To send a text message
1. In Menu mode, select Messages → Create
message .
2. Enter a destination number and scroll down.
3. Enter the message text.
►
Enter text
4. Press the Confirm key to send the message.
To view text messages
1. In Menu mode, select Messages → Inbox .
2. Select a text message.
Make fake calls
You can simulate an incoming call when you want to
get out of meetings or unwanted conversations.
To make a fake call,
Press and hold the Navigation key down in Idle •
mode.
Press the Navigation key down four times when
•
the keys are locked.
Make a call
1. In Idle mode, enter an area code and a phone
number.
2. Press [ ] to dial the number.
3. To end the call, press [ ].
The volume through mono earphones is very low or
virtually inaudible. Use stereo earphones only.
Answer a call
1. When a call comes in, press [ ].
2. To end the call, press [ ].
Use the shortcut toolbar
You can use the shortcut toolbar to access your
favourite menus.
To add menus on the shortcut toolbar
1. In Menu mode, select Settings → Display →
Shortcuts toolbar .
2. Press < Options > → Edit .
3. Select your favourite menus.
Activate the mobile tracker
This feature helps track your phone when it is stolen
or when someone tries to use your phone using
other SIM card, the phone will automatically send
the preset tracking message to family or friends.
This feature may be unavailable due to certain
features supported by your service provider.
1. In Menu mode, select
Settings → Security →
Mobile tracker .
2. Enter your password and press < OK >.
The first time you access Mobile tracker, you will be
prompted to create and confirm a password.
3. Scroll left or right to On .
4. Scroll down and press the Confirm key to open
the recipient list.
5. Press the Confirm key to open your contact list.
6. Select a contact.
7. Select a number (if necessary).
8. Press <
Options > → Save to save the recipients.
9. Scroll down and enter the sender's name.
10. Press the Confirm key → < Accept >.
4. Press < Options > → Open to select submenus
(if necessary)
5. Press < Save >, or press < Options > → Save .
To access a menu from the shortcut toolbar
In Idle mode, scroll left or right to the menu you want
and press the Confirm key.
When the shortcut toolbar is activated, the Navigation
key does not work as shortcuts depending on your
region.
Adjust the volume
To adjust the volume of the ringtone
1. In Menu mode, select Settings → Profiles .
2. Scroll to the phone profile you are using.
If you are using the silent profile, you are not allowed to
adjust the volume of the ringtone.
3. Press < Options > → Edit .
4. Select Volume and scroll to Call alert .
5. Scroll left or right to adjust the volume level.
6. Press <
Save > → < Back >.
Activate the torch light
The torch light feature helps you see in dark places
by making the display and backlight as bright as
possible.
To activate the torch light, press and hold the
Navigation key up in Idle mode.
To deactivate the torch light, press <
Back >.
Number mode
Press the appropriate alphanumeric key to enter a
number.
Symbol mode
Press the appropriate alphanumeric key to enter a
symbol.
To use other feature for text input
To move the cursor, press the Navigation key. •
To delete characters one by one, press < • Clear >.
To insert a space between characters, press [ • 0 ].
To enter punctuation marks, press [ • 1 ].
Add a new contact
Your phone is preset to save contact to the phone
memory. To change the memory location, in Menu mode,
select Settings → Application → Contacts → Save
new contacts to → a memory location.
1. In Idle mode, enter a phone number and press
< Options >.
2. Select Create contact .
3. Select a number type (if necessary).
4. Enter contact information.
5. Press the Confirm key to add the contact to
memory.
Access menus
To access your phone's menus,
1. In Idle mode, press <
Menu > to access Menu
mode.
You may need to press the Confirm key to access Menu
mode depending on your region or service provider.
2. Use the Navigation key to scroll to a menu or
option.
3. Press < Select >, < OK >, or the Confirm key to
confirm the highlighted option.
4. Press < Back > to move up one level; Press [ ]
to return to Idle mode.
When you access a menu requiring the PIN2, you must •
enter the PIN2 supplied by the SIM card. For details,
contact your service provider.
Samsung is not responsible for any loss of passwords •
or private information or other damages caused by
illegal software.
Set and use alarms
To set a new alarm
1. In Menu mode, select Alarms .
2. Select an empty alarm location.
3. Set alarm details.
4. Press <
Save >, or press < Options > → Save .
To stop an alarm
When the alarm sounds,
Press < • OK > or the Confirm key to stop the alarm
without snooze.
Press < • OK > or the Confirm key to stop the alarm
with snooze, or press < Snooze > to silence the
alarm for the snooze period.
To deactivate an alarm
1. In Menu mode, select Alarms .
2. Select the alarm you want to deactivate.
3. Scroll left or right to
Off .
4. Press < Save >.
If the battery has been removed, the scheduled alarm
may not sound.
Enter text
To change the text input mode
Press and hold [ • ] to switch between T9 and ABC
modes. Depending on your country, you may be
able to access an input mode for your specific
language.
Press [
• ] to change case or switch to Number
mode.
Press [
• ] to switch to Symbol mode.
Press and hold [ • ] to select an input mode or
change the input language.
T9 mode
1. Press the appropriate alphanumeric keys to enter
an entire word.
2. When the word displays correctly, press [ 0 ]
to insert a space. If the correct word does not
display, press the Navigation key up or down to
select an alternate word.
ABC mode
Press the appropriate alphanumeric key until the
character you want appears on the display.
Do not remove the battery from the phone before •
unplugging the travel adapter first. Otherwise, the
phone may be damaged.
To save energy, unplug the travel adapter when not •
in use. The travel adapter does not have a power
switch, so you must unplug the travel adapter from the
outlet to interrupt the power supply. The travel adapter
should remain close to the socket when in use.
Instructional icons
Note : notes, usage tips, or additional information
→
Followed by : the order of options or menus you must
select to perform a step; for example: In Menu mode,
select Messages → Create message (represents
Messages , followed by Create message )
[ ]
Square brackets : phone keys; for example: [ ]
(represents the Power/End key)
< >
Angled brackets : softkeys that control different
functions at each screen; for example: < OK >
(represents the OK softkey)
Turn your phone on or off
To turn your phone on,
1. Press and hold [
].
2. Enter your PIN and press < OK > (if necessary).
3. When the setup wizard opens, customise your
phone as desired following the screen.
To turn your phone off, repeat step 1 above.
Activate and send an SOS message
In an emergency, you can send SOS messages to
your family or friends for help.
To activate the SOS message
1. In Menu mode, select Messages → Settings →
SOS messages → Sending options .
2. Scroll left or right to On .
3. Scroll down and press the Confirm key to open
the recipient list.
4. Press the Confirm key to open your contact list.
5. Select a contact.
6. Select a number (if necessary).
7. When you are finished selecting contacts, press
< Options > → Save to save the recipients.
8. Scroll down and set the number of times to
repeat the SOS message.
9. Press < Save > → < Yes >.
To send an SOS message
1. With the keys locked, press [ ] four times to
send an SOS message to preset numbers.
The phone switches to SOS mode and sends
the preset SOS message.
2. To exit SOS mode, press [ ].
To adjust the volume of voice during a call
While a call is in progress, press the Navigation key
up or down to adjust the volume.
In noisy environments, you may have difficulty hearing
the calls while using the speakerphone feature. For
better audio performance, use the normal phone mode.
Change your ringtone
1. In Menu mode, select Settings → Profiles .
2. Scroll to the profile you are using.
3. Press < Options > → Edit .
4. Select Call ringtone .
5. Select a ringtone.
To switch to another profile, select it from the list.
Call a recently dialled number
1. In Idle mode, press [ ].
2. Scroll left or right to a call type.
3. Scroll up or down to a number or name.
4. Press the Confirm key to view details of the call
or [ ] to dial the number.
Install the SIM card and battery
1. Remove the back cover and insert the SIM card.
Back cover SIM card
2. Insert the battery and replace the back cover.
Battery
Charge the battery
1. Plug the supplied travel
adapter.
To AC power outlet
2. When charging is
finished, unplug the
travel adapter.