Applications 191
Customizing Your Remote
1.
From the top of the main screen, tap
(
Remote
Control
)
➔
Continue
.
2.
From the
Select your TV brand
screen, tap your TV’s
manufacturer name.
•
If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either
Show other brands
or
I have a home projector
.
3.
Aim your device at the TV and tap
(
Power
) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note:
The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
4.
If the TV turned on, tap
Yes, this code 1 works
.
– or –
If the TV did not turn on after tapping
(
Power
) and
waiting 10 seconds, tap
No, test next code 2
or
Send this code 1 again
.
5.
From the
Select your channel source
screen, select the
entry that corresponds to your current channel control
method:
• Set-top Box
: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote but
rather through the receiver/box.
• My xxx TV
: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box’s remote.
Note:
Try matching your current channel selection method.
6.
Select the Satellite Box Brand from the available list.
For example, DirectTV
®
.
•
If your brand does not appear in the list, tap
Show other
brands
and follow the on-screen instructions.
Important!
You must configure your set top box for IR
communication with your device. If you do not
select
More info
below and follow the on-screen
instructions you may not be able to properly use
the application.
DRAFT
FOR INTERNAL USE ONLY
