Samsung Galaxy S Epic SPH-D700, User Manual, Page: 169 / 282

2J. Bluetooth 155
Bluet
oot
h
3.
Tap
Scan devices
. (Your device will display a list of
discovered in-range Bluetooth devices.
4.
Tap a device from the list to initiate pairing.
5.
Enter the passkey or PIN code and tap
OK
.
6.
The external device will then have to also accept
the connection and enter your device’s PIN code.
䡲
Once successfully paired to an external device,
appears within the Status area.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your Epic 4G, but retains the
knowledge of the pairing. At a later point when you
wish to reconnect the device, there is no need to setup
the connection information again.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, touch and hold
the name of the previously paired device.
3.
Tap
Unpair
to confirm disconnection.
Note:
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Note:
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
Note:
Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your Epic 4G or it is powered off.
SPH-D700.book Page 155 Thursday, December 9, 2010 10:22 AM