A
ssembling and preparing
your mobile
Device
Get started by assembling and setting up
your mobile
Device
for its first use.
Install the SIM card
When you subscribe to a cellular service, you will receive a Subscriber Identity
Module, or SIM card, with subscription details, such as your personal identification
number (PIN) and optional services.
To install the SIM card
.
1.
] to turn it
Remove the
SIM
cover. If the
Device
is on, press and hold
[
off.
2. Insert the SIM card. Place the SIM card in the
Device
with the gold-coloured
contacts facing down.
Charge the battery
Before using the
Device
for the first time, you must charge the battery.
1. Open the cover to the multifunction jack on the side of the
Device
.
2. Plug the small end of the travel adapter into the multifunction jack. Improperly
connecting the travel adapter can cause serious damage to the
Device
. Any
damages by misuse are not covered by the warranty.
3. Plug the large end of the travel adapter into a power outlet.
4. When the battery is fully charged (the [|||||] icon is no longer moving), unplug
the travel adapter from the power outlet.
5. Unplug the travel adapter from the
Device
.
6. Close the cover to the multifunction jack.
About the low battery indicator
When your battery is low, the
Device
will emit a warning tone and a low battery
message. The battery icon will also be empty and blinking. If the battery level
becomes too low, the
Device
will automatically power off. Recharge your battery
to continue using your
Device
.
Page 17 of 40
