36
4. Troubleshooting
SYMPTOM
DIAGNOSIS
REMEDY
Oven temperature
is risen fast .
*
Check whtether temperature is risen
over 400˚F(202˚C) within 10 minutes
in a state of room temperature .
*
Replace or repair it if relay on main PCB
have a short circuit .
*
Check whether harness has been
misconnected or have a short circuit .
*
Replace or repair harness .
*
Measure resistance values of each
heater are within a normal extent or
not .
*
Replace heater is in a abnormal state .
The self-cleaning
feature will not
operate when
warming center
is on
*
This is in normal state .
*
The self-cleaning feature will not operate
when warming center or warming drawer
is on .
Keypad is not
worked normally
in partially or
entirely .
*
Make sure that keypad cable on
main PCB is in normal state .
*
Replace after confirming whether it has
been loosen or disconnected .
*
Make sure connector (CN05) on
main PCB or PCB pattern .
*
Replace or repair after confirming
whether keypad cable has been loosen or
disconnted .
Oven lamp is not
working .
*
Check the oven lamp relay (Ry09) on
sub PCB and connector (CN06) .
*
Replace or repair if harness has been
loosen or disconnected .
*
Replace oven lamp relay(Ry09) or Ry-
source relay .(Ry01)
*
Replace main PCB .
*
Measure the resistance value of both
ends of lamp terminal .
*
Replace lamp if it has been
disconnected.(120V / 40W)
