Samsung F6300 E-Manual Download

Page: 32 / 173

Failed Wired Connection

No network cable found

Make sure the network cable is plugged in. If it is connected, make sure the router is turned on. If it is
on, try turning if off and on again.

IP auto setting failed

Perform the following or set the IP address manually from

IP Settings

Ensure that the DHCP server is enabled on the router and reset the router.

If this does not work, contact your Internet Service Provider for more information.

Unable to connect to the network

Check the following:

Check the

IP Settings

settings.

Ensure that the DHCP server is enabled on the router and unplug and then plug the router back in.

If this does not work, contact your Internet Service Provider for more information.

Connected to a local network, but not to the Internet

Make sure that the Internet LAN cable is connected to the router's external LAN port.

Check the DNS settings under

IP Settings

If the problem persists, contact your Internet Service Provider.

Network setup complete, but unable to connect to the Internet

If the problem persists, contact your Internet Service Provider.

Summary of Contents for F6300














































































































































































Search results

Summary of Contents for F6300

Reviews:

Related manuals for F6300

Brands by name

Popular brands

Samsung F6300, E-Manual

Search results

Summary of Contents for F6300

Reviews:

Related manuals for F6300

Brands by name

Popular brands