English - 26
Using the E-SMART Function
The E-SMART function enables you to control and
monitor your E-Smart refrigerator remotely for your
convenience.
• To use the E-SMART refrigerator
functions, you have to install the
corresponding app fi rst.
• The app supports indoor control only.
1. Operational Status, User Settings & Messages
• You can view the freezer and fridge temperature
settings.
• You can receive an alarm when the freezer or
fridge door is open for 3 minutes.
• You can check the DR and Override status.
• You can check the operational condition of the
ice maker in the freezer.
2. Remote Management
• Power Freeze Setting: You can remotely
activate the Power Freeze function.
• Power Cool Setting: You can remotely activate
the Power Cool function.
• Ice On/Off Setting: You can remotely set up the
Ice On/Off Setting function.
You can only control the Ice maker in the Fridge
remotely.
3. Energy Consumption Reporting
• Shows the accumulated power consumption.
Power consumption data is updated every10
minutes.
The energy consumption report may
differ from the power consumption
specifi cations of the product depending on
the operating environment and the stored
food.
4. Delay Defrost Capability
• The Delay Defrost Capability function saves
energy by delaying the defrost operation to a
time specifi ed by the user.
You can confi gure the time. and this function
will save energy during the specifi ed period in a
24 hour cycle.
If the time is not set, the function works with the
default time settings.
The default time settings are below:
-
6 am to 10 am: 1st. November ~ 30th. April
-
3 pm to 7 pm: 1st. May ~ 31th. October
To change the time setting for the Delay
Defrost Capability
You can change the time setting for the Delay
Defrost Capability on the app.
Provision for Open Access to the
Connected Product Requirements
1. SGIP Open Standards (Smart Energy Profi le 2.0
- http://www.csep.org/)
• Energy Consumption Reporting
• Demand
Response
2. Samsung OPEN API
• Operational Status, User Settings & Messages
-
ICE Maker Status: GET /external/
icestatus?icegetstatus=opt (relevant to the
energy consumption of the product 1)
-
Door Open Alarm: GET /devices/0/
Door?type=opt (relevant to the energy
consumption of the product 2)
-
DR Status: GET /external/drlc?drgetstatus=opt
• Delay Defrost Capability
-
Set Schedule of the Defrost Delay: POST /
devices/0/defrost/addSchedule
-
Get Schedule of the Defrost Delay : GET /
devices/0/defrost/getSchedule
-
Delete Schedule of the Defrost Delay: POST /
devices/0/defrost/delSchedule
-
Defrost Delay On/OFF: PUT /devices/0/defrost/
delayevent
DA68-02954B-02.indb 26
DA68-02954B-02.indb 26
2015. 1. 12.
3:09
2015. 1. 12.
3:09