English-4
5.
To make sure the Evolution Kit attached securely,
press it again, as shown by the figure below.
6.
To use a wired network on a TV that has an Evolution Kit attached,
disconnect the LAN cable from the TV, and then connect it to the
Kit using the LAN Cable Adapter.
1
2
7.
Plug the TV’s power cable to an outlet.
8.
Turn on the TV.
9.
Please wait for the Evolution Kit to be recognised (up to 10 seconds).
10.
Once recognised, the Evolution Kit will update the TV to the 2013 version. Wait for the update process to finish.
✎
The TV will turn off and on automatically after completing the software update.
✎
The LAN cable adapter and Smart Touch Control unit can only be used after installing the Evolution Kit on the TV.
✎
When updating the TV with the Evolution Kit installed using a USB device, check the version of the file stored in the USB
device before performing the update. Software update files are divided into two sorts: one is only for the TV and the other is
only for the Evolution Kit. Software update is possible only if the versions of the two files are identical with each other.
[SEK-1000]BN68-05216E-01L02.indb 4
2013-07-26 4:41:50
